1310 and 1550nm SLED Broadband Light Source
Application:
Features:
Optical fiber sensing
High output power
High stability
Broadband spectrum output
Optical fiber passive component spectrum testing
Optical fiber grating, filter testing
Optical fiber measurement equipments
Specifications:
Parameters
1310 and 1550 SLED
Central wavelength (nm)
1310±10 and1550±10,etc
-3dB spectrum width (nm)
Output power (mW)
≥50, etc
1, 5, 10, 20, 30,etc
Ripple (dB)
≤0.2
≤±0.01 dB/15 min
Output power short -term stability1
Output power long- term stability2
Operating mode
≤±0.03 dB/8 hour
CW
Fiber pigtail
Single mode SMF-28
FC/PC, FC/UPC or FC/APC,etc
0 ~ 40
Output connector
Operating temperature(℃)
Storage temperature(℃)
Power supply
-20 ~ 70
110/220V AC±10%, 50Hz, 20W
90×70×19(Module), or 320×220×90(Desk-top)
Dimensions (L×W×H, mm)
Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.
1. Test condition: fixed temperature, CW.
2. Test condition: temperature variation ±2℃, CW.
mar
k
et@acfiber.com